The MITSUBA classical RE belt type with mould cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The mould cog provides high flexibility and a good fit in the pulley grooves as well as lower operating temperature, which increase belts life.
The MITSUBA classical RE belt has a wide range of applications with high belt speeds and small pulley diameters. The belt allows immediate improvement of existing drives which use wrapped bets, providing overall benefits with regards to economy as well as power transmission and reliability of operation.
RAW EDGE COG BELTS
RAW EDGE LAMINATE
The MITSUBA Timing Belt is designed with tooth profile feature better stress desperation and less noise drive at high speed operation. The belt is smooth engagement with the pulley, giving more power, longer service life, and greater dependability with the high ratio or high speed drives. We offer wide range for Automotive Application, such as, Japanese, Korean, Americans, and European Vehicle. Spec: CR (Suitable for Aftermarket)
: FHN (Suitable for OES, Aftermarket) : H.NBR (Suitable for OES, OEM)
The MITSUBA timing belt is for maintenance-free performance on timing and positive drive applications.
HTDN I (RPP)
HTDN II (SHD)
The MITSUBA poly V-belt, also termed multi-ribbed belt, with the characteristic V-ribs which is resistant to oil and temperature stresses, static dissipating. The belts are developed to improve capacity with outstanding performance at higher speeds on smaller diameter pulleys. The V-profiles of the belt are in a special formulated rubber compound with direction oriented fibres that cut noise and provide very high flexibility and stability.
The MITSUBA poly V-belt can replace several traditional belts and reduce operating costs considerably. The belt also distinguishes themselves by their light and vibration free operation and long life. The low cross section of the multi-rib belt makes it very flexible and permits it to be used in serpentine drives.
BANDED COG BELTS
The MITSUBA banded cog belt is consist of several cog-belt joined together which is high stability and smooth running on the toughest drives.
The MITSUBA banded cog belt is designed for automotive application used, and also available for industrial use. such as, bus and truck. Agriculture Machinery also available.
The MITSUBA scooter belt has high endurance with lateral pressure of pulley and shows good conformity with CVT system. High modulus bottom fabric makes it possible to increase flexibility and enhanced compression makes more anti-heat resistance of the belt.
he MITSUBA scooter belt specially designed for variable speed applications tailored for maximum range rigidity for full tensile cord support. The belt tailored manufacturing for the variable speed drive and scooter needs.
HIGH PERFORMANCE GRADE
TOP COG GRADE
CLASSICAL WRAPPED V-BELTS
The MITSUBA classical V-belts are a temperature and oil resistant as well as antistatic, designed for Agricultural Machinery, Rice Combine, and Harvesting Machine with the premium quality significant, and longer service life. We offer 2 different grades to suit the market need and application, such as Standard and Agri Grade.
The MITSUBA classical V-belts are an all-round V-belt type with a wide range of applications in agricultural machinery with a technically and economically good design for most ordinary drives with higher power transmission capability.
The MITSUBA metric V-belts are oil and heat resistance, and they are antistatic. The belt core comprising rubber compression zone which is resistant to intensive heat stresses and compressions as well as the power transmitting cord, is wrapped in a fabric cover that provides both protection against exter- nal influences and uniform friction against the pulleys.
The MITSUBA combine V-belts are used in combine and agricultural machinery. They are especially suitable for drives with high belt speeds, and allowing use of back idler.
AG - Plus
AG - Pro
AG - Thai
DOUBLE V BELTS
The MITSUBA double V-belt combines temperature and oil resistance with antistatic features. The cord is placed at the centre of the belt cross section, making the belt flexible in both directions. The belts are able to transmit approx. 50% of the power ratings specified for the classical V-belt with the same top width.
The MITSUBA double V-belt profile of the belt makes it suitable for drives with an S-bend and in which both sides of the belt have to be used for transmitting power. This type of drive is especially used in agricultural machinery. The belt is also used for special indus- trial drives.
Pulley is specially required in order to achieve the
coupling effect. In addition to the performance charac- H
teristics of the various v-bets, the banded v-belt offers the
following advantages as compared to single v-belts. - No slip between the v-belts - Better absorption of shock loads
Spec: Available in AG-Plus and AG-Pro Grade
The MITSUBA banded metric wedge V-belt is used on agricultural machinery, and particularly combine harvesters, they are often used as coupling belts, replacing flat belts or instead of belt sets in order to reduce vibration and increased belt life.
On industrial machinery also use with pulsating or shock pads, e.g. crush- ers, compressors, etc., as well as for drives in which the natural vibrations of a belt set may have an adverse effect on the operation of the machine, e.g. lathes, cutters and grinders.
AG - Plus
AG - Pro
AGRICULTURE VARIABLE SPEED V-BELTS
The MITSUBA agricultural variable speed V-belt (Cog Type and Wrapped Type) is temperature and oil resistant. The cord, the power transmitting element has been designed for heavy power transmission while at the same time ensuring a very high degree of length stability. A special rubber compound with textile fibres oriented across the length of the belt provides high stability and minimizes deflection in the transverse direction. The mould cog ensures maximum flexibility and optimum fit in the pulley grooves.
The MITSUBA agricultural variable speed V-belt is used on agricultural machinery, and particularly combines harvesters.
JAPANESE COMBINE V-BELT
The MITSUBA Japan Combine V-belt for agriculture machinery is available both wrapped type and cog type, all of which are temperature and oil resistant as well as antistatic. The belt is made with chloroprene rubber, wear resistant fabric cover, and Kevlar cord which providing an extraordinary and durability. Availble in both Polyester Cord and Aramid Cord.
The MITSUBA Japan Combine V-belt which makes it a top-end V belt for the agricultural machinery use enabling high-load power transmission under harsh environments.
Classical Wrapped V-Belts สายพานร่องวี โดยสายพานมีลักษณะแบบหุ้มผ้า มีคุณสมบัติทนต่ออุณหภูมิ และน้ำมันรวมทั้งป้องกันไฟฟ้าสถิตย์ ได้รับการออกแบบมาสำหรับเครื่องจักรความเร็วสูงและแรงบิดสูง - ผ้าที่หุ้มสายพานร่องวี มีความยืดหยุ่นมากกว่าสายพานยี่ห้ออื่น - เส้น Thesion Member คอร์ด ให้ความแข็งแรง ยืดหยุ่นในขณะที่ใช้งาน - ส่วนผสมของยางเนื้อสายพาน ถูกออกแบบมาเพื่อให้ลดการสะสมความร้อน และกระจายแรงดึงให้ทั่วสายพาน
สายพานร่องวี ผู้ใช้หลายคนมักเรียกชื่อแตกต่างกันออกไป เช่น สายพานร่องวี สายพานห่อผ้า สายพานร่องเรียบ และอื่นๆ
สายพานร่องวี มีหลายขนาดให้เลือกเพื่อความเหมาะสมกับการใช้งาน เช่น M, A, B, C, D และ E